product:4925
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| product:4925 [2020/12/17 12:33] – created ryan | product:4925 [2023/07/12 14:33] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ===== Introduction | + | ===== 4925 4-20mA Tilt Trim Adaptor |
| + | |||
| + | ==== Introdution | ||
| The Oceanic Systems Tilt Trim Adaptor is designed to monitor a 4–20mA trim sensor, and supply output on the NMEA2000® network. Multiple units can be used in conjunction with each other when monitoring multiple tilt trims. The Tilt Trim Adaptor is designed to be located in a dry and protected location. It is very important that it is installed and set up correctly according to this manual. Please read and follow the installation and setup instructions carefully to achieve the best results. | The Oceanic Systems Tilt Trim Adaptor is designed to monitor a 4–20mA trim sensor, and supply output on the NMEA2000® network. Multiple units can be used in conjunction with each other when monitoring multiple tilt trims. The Tilt Trim Adaptor is designed to be located in a dry and protected location. It is very important that it is installed and set up correctly according to this manual. Please read and follow the installation and setup instructions carefully to achieve the best results. | ||
| Line 86: | Line 88: | ||
| ^LED^Status^Reason| | ^LED^Status^Reason| | ||
| |Red LED|Lit|Sensor invalid reading| | |Red LED|Lit|Sensor invalid reading| | ||
| - | |Blue LED \\ | + | |Blue LED \\ \\ |Flashing once every 2.5 Seconds|Normal Operation| |
| | ::: |Remains lit for 2 seconds|Calibration Success| | | ::: |Remains lit for 2 seconds|Calibration Success| | ||
| | ::: |Flashing rapidly when calibrating|Calibration in Progress| | | ::: |Flashing rapidly when calibrating|Calibration in Progress| | ||
| Line 103: | Line 105: | ||
| As Oceanic Systems are constantly improving their products specifications are subject to change without notice. Oceanic System’s products are designed to be accurate and reliable however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. | As Oceanic Systems are constantly improving their products specifications are subject to change without notice. Oceanic System’s products are designed to be accurate and reliable however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. | ||
| - | ^ \\ Parameter | + | ^ \\ Parameter^ \\ Comment| |
| |NMEA2000 Version|2.101 Level B| | |NMEA2000 Version|2.101 Level B| | ||
| |Maritime Navigation and Radio Communication Equipment|IEC60945| | |Maritime Navigation and Radio Communication Equipment|IEC60945| | ||
| Line 110: | Line 112: | ||
| ==== NMEA2000® Parameter Group Numbers (PGNs) ==== | ==== NMEA2000® Parameter Group Numbers (PGNs) ==== | ||
| - | ^ \\ Type \\ ^ \\ PGN No. \\ ^ \\ PGN Name \\ | | + | ^ \\ Type^ \\ PGN No.^ \\ PGN Name| |
| |Monitor|PGN130576|Tilt Trim Status| | |Monitor|PGN130576|Tilt Trim Status| | ||
| |Protocol|PGN126464|Tx/ | |Protocol|PGN126464|Tx/ | ||
| Line 133: | Line 135: | ||
| ==== Electrical and Mechanical ==== | ==== Electrical and Mechanical ==== | ||
| - | ^ \\ Parameter | + | ^ \\ Parameter^ \\ Value^ \\ Comment| |
| |CAN Operating Voltage|9 to 32 Volts| | | |CAN Operating Voltage|9 to 32 Volts| | | ||
| |Power Consumption|71.5mA|Average Operating| | |Power Consumption|71.5mA|Average Operating| | ||
| Line 142: | Line 144: | ||
| ==== Environmental ==== | ==== Environmental ==== | ||
| - | ^ \\ Parameter | + | ^ \\ Parameter^ \\ Value| |
| |IEC 60954 Classification|Protected| | |IEC 60954 Classification|Protected| | ||
| |Degree of Protection|IP50| | |Degree of Protection|IP50| | ||
product/4925.1608208422.txt.gz · Last modified: 2023/07/12 14:11 (external edit)