Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:3130 [2022/02/24 11:19] – chrissy
+++ internal:proddocs:3130 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 83: / Line 83: @@
 {{:internal:proddocs:5-3130.jpg?600|}}
-  * Turn the supply off and wait for the Blue LED to turn on and return to normal operation (this can take up to 30 seconds)
+  * Turn the supply off and wait for the Blue LED to turn off and return to normal operation (this can take up to 30 seconds)
   * Connect a power supply to the pins on the PCB **AS SHOWN BELOW, PAY ATTENTION TO THE POLARITY OF THE CONNECTION!**
@@ Line 183: / Line 183: @@
-Once the epoxy potting has cured, the serial number label can be adhered to the potting side of the product as shown. Position squarely between the dial switches and the LED the label is printed with:
+Once the epoxy potting has cured, the serial number label can be adhered to the potting top of the product as shown. Position carefully,  the label is printed with:
 Product name and part number
 Serial Number
@@ Line 189: / Line 189: @@
 Connect to Monex and assign serial number to the units using the set serial function.
-{{:internal:proddocs:20210914_104432_2_.jpg?600|}}
+{{:internal:proddocs:3130..1.jpg?600|}}
 ====== Packaging ======
-Use RPT112 and bubble bag
+Use RPT108 and bubble bag
-<note important>one pic is for picture is for the Honda</note>
-Standard will be the same label size only box label will be our standard product and sleeve.
+{{:internal:proddocs:3130..2.jpg?600|}}{{:internal:proddocs:3130..3.jpg?600|}}
+ --- //[[chrissy@osukl.com|Christine Walsh]] 28/02/2022 08:52//updated potting and packaging.