This is an old revision of the document!

Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103

3185 Build Instructions

The 3185 PCB assembly contains components that are sensitive to electrostatic discharge (ESD) – please make sure you are wearing your wrist strap when handling.

Tools: 5mm long drive socket + driver, T10 Torx security bit, 17mm spanner.

Programming Instructions

J1939 to NMEA 2000 Flashing Guide. MPLAB ICD 3 Connection

Connect the J1939 to NMEA2000 adapter RJ-11 jack to the MPLAB ICD 3 RJ11 connector

CAN Network power connection

Connect the J1939 to NMEA2000 adapter to the CAN network power source using the CAN connector

Open MPLAB IPE

Now configure MPLAB IPE to the correct settings for interfacing with the J1939 to NMEA2000 adaptor

Ensure the values are correct then press connect

Then select the Hex file you wish to load by clicking the browse button

This dialogue should then appear to enable you to select a Hex file for programming

The location of the Hex files for this particular product is located in S:\Code\Production\3185 J1939 to NMEA2000 Adaptor