Last Modified on ~~LASTMOD~~

Affix black label with see through panel for LED and cutouts for rotary switch to the black case shell.

Apply 3478 Silver label to the top of the unit.

Insert built PCB into the casing.

Add a dot of thread lock to base of connector thread, then do up the nut with 1/4 turn torque.

Glue base of unit on AFTER TESTING

Connect unit to programming device.

• Select STM32CubeProgrammer
• Connect to Unit

• Select Device programming

• Browse and select the S:/Code/Production/3478/3478Bootloader

  * Click Start Programming Making sure all the checked boxes are correct

You can now disconnect the unit, if programming unsucessful, erase the device memory and try again.

• Open Monex and click 'Get Serial' and 'GetProdInfo', you should see the following

• Go to the Programming tab and match the device instance to the Target Select

• Click on 3478 and the Reprogram on the pop-up
• Select S:/Code/Production/3478/3478

• The Device should start programming and should 'PASS', and Reboot to Application Code

• Go Back to Device Info Tab and check that Model ID now shows as Relay Output Module 8

1. Close all programs, keep Monex open
2. Open relay program at S:/Code/Published PC Programs/Relay Board Tester/x64/RelayBoardTester.exe
3. Turn on all of the switches individually, check the green LEDs come in and you hear a switching noise.
4. Each light should come on for its respective number
5. Afterwards, use the “test all” button, this will trigger all relays and all LED’s
6. Click “Auto test”- this will give a confirmation if successful.
7. Close Relay Tester and open Monex

1. Now, check each position of the instance switches respond using Monex
2. Finally, apply a serial number to the unit using Monex.

Go to (S) Drive. Parts Documents. Select 3478. Select PDF's. Select 3478_user manual and print.

Choose labels required

Select (LabelDirect)

Close (Pop Up)

Go to file-open

Select - Parts documents

Select - 3478

Select - Labels

Select - UL_3478_D1 2.0.1.lab (Standard)

Highlight Serial number and change in Text box.

Go to Incrementing number Properties and change serial number.

Go to file -Print Setup

Select bradyBBP11-34L(copy 1) and select Calibrate.

label will calibrate.

Check serial number has been applied before boxing.

Use RPT112 Box.

Use a 200374 insert.

Ensure all items are labelled and inspected before shipping.

Sign the outer packaging QC label.

— Christine Walsh 23/09/2021 10.36