Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:4411 [2022/03/14 08:33] – chrissy
+++ internal:proddocs:4411 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 15: / Line 15: @@
 ====== Step 1. ======
+**Solder one end of 8 of Resistors to
+AWG Yellow wire, cover resistor and solder
+joint with sleeving see pic below.**
+{{:internal:proddocs:4411.1.png?600|}}
+====== Step 2. ======
+**Twist other ends of resistors together and solder
+to 22AWG Violet wire see pics below.
+**
+{{:internal:proddocs:4411.2.png?600|}}{{:internal:proddocs:4411.3.png?600|}}
+====== Step 3. ======
+**Cover Resistors with Heatshrink, use heat gun
+to Secure see pic below.
+**
+{{:internal:proddocs:4411.4.png?600|}}
+====== Step 4. ======
+**Add 200337 45mm x 15mm Metallic Silver Polyester label to assy and
+Package with installation instructions.
+**
+<note important>Label unit with serial number, ensure label is secured onto cable.</note>
+{{:internal:proddocs:img_20220314_084940_1_.jpg?600|}}{{:internal:proddocs:img_20220314_084958_1_.jpg?600|}}
+**Insert Data sheet into the back of the blister pack and label as shown in picture below**
+{{:internal:proddocs:img_20220314_085008_1_.jpg?600|}}