Using a File, modify the corners of the lower rear cover (203084). Identify with white marker see picture below. Ensure all debris has been removed.

Place heat shrink on cable (200584) and solder red and black wire to power connector (202433) on power PCB (10293-A) then heat shrink cable. See pic

Insert holes on Bezel with 4 x (203324) Standoffs.

Fit PCB 10293-A into position adjacent AD board video board Fit Video Board in position using Screws (202429)

Fit TFT using screws (202880) x 4 and Loctite 222.

Solder Red and Black wire from connector (202433) to power board (10293-A)

Solder black and red wire to AD board.

Use the Atmel programmer, using standard parameters:

See fig below

• BOOTLEVEL = 2V7
• SPIEN = Checked
• BOOTSZ = 2048W_7800
• BOOTRST = Checked
• SUT_CKSEL =
• EXTXOSC_PLLIN_EXTXOSC_16KCK_14CK_64MS
• (last selection on the list)
• Then press the “Program” button
• Then program the software by clicking on
• “Memories” menu
• Then power cycle the unit.

• Connect USB and VGA cables to board.
• Power up supply.
• Check all functions on display are in working order.
• Disconnect leads

Manual Printing

• Go to (S) Drive.
• Parts Documents.
• Select 5021
• Select PDF's.
• Select 5021_user manual and print.

Label printing

• Choose labels required
• Select (LabelDirect)
• Close (Pop Up)
• Go to file-open
• Select - Parts documents
• Select - 5021
• Select - Labels
• Select – 5021 info
• Highlight Serial number and change in Text box.
• Go to Incrementing number Properties and change serial number.
• Go to file -Print Setup
• Select bradyBBP11-34L(copy 1) and select Calibrate.
• label will calibrate.