internal:proddocs:5021

This is an old revision of the document!

Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103

Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103

Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103

5021 Build instructions

The 5021 PCB assembly contains components that are sensitive to electrostatic discharge (ESD) – please make sure you are wearing your wrist strap when handling.

Using a File, modify the corners of the lower rear cover (203689).

Identify with white marker see picture below. Ensure all debris has been removed.

The 10866 cable assembly needs to be modified remove small connector only from assembly add 203794 connector and 203793 crimp. (Ref 10871 drawing)

Place heat shrink on cable (200584) and solder red and black wire to power connector (202433) on power PCB (10293-A) then heat shrink cable. See pic

Insert holes on Bezel with 4 x (203324) Standoffs.

Fit PCB 10293-A into position adjacent AD board video board Fit Video Board in position using Screws (202429)

Fit TFT using screws (202880) x 4 and Loctite 222.

Solder Red and Black wire from connector (202433) to power board (10293-A)

Solder black and red wire to AD board.

====== Programming Instructions ======

Disconnect white connector leads from board

Insert main power lead

Use the Atmel programmer, using standard parameters:

See fig below

BOOTLEVEL = 2V7
SPIEN = Checked
BOOTSZ = 2048W_7800
BOOTRST = Checked
SUT_CKSEL =
EXTXOSC_PLLIN_EXTXOSC_16KCK_14CK_64MS
(last selection on the list)
Then press the “Program” button
Then program the software by clicking on
“Memories” menu
Then power cycle the unit.

====== Test Procedure ======

Connect USB and VGA cables to board.
Power up supply.
Check all functions on display are in working order.
Disconnect leads

Silicone screen and leave to cure overnight. once cured check for any holes

Manual Printing

Go to (S) Drive.
Parts Documents.
Select 5021
Select PDF's.
Select 5021_user manual and print.

Label printing

Choose labels required
Select (LabelDirect)
Close (Pop Up)
Go to file-open
Select - Parts documents
Select - 5021
Select - Labels
Select – 5021 info
Highlight Serial number and change in Text box.
Go to Incrementing number Properties and change serial number.
Go to file -Print Setup
Select bradyBBP11-34L(copy 1) and select Calibrate.
label will calibrate.

====== Packaging ======

Ensure Blue film is positioned on screen.

Inserts to be positioned on each end of screen.

— Christine Walsh 29/09/2021 15:03

internal/proddocs/5021.1645617999.txt.gz · Last modified: 2023/07/12 14:11 (external edit)