internal:proddocs:5170
This is an old revision of the document!
Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103
5170 Build Instructions
Remove the cover of the NVR case (203706) = 3 screws Rotate the fan through 90 degrees making sure the power cable is on the bottom – nearest where the Motherboard will go.
Remove the Hard drive bracket near the fan.
Remove extra motherboard mounting post from the casing.
This is a bit tricky and will need a pair of grips to rotate the pin out of the case. Make sure there is no lose metal left behind.
internal/proddocs/5170.1632998948.txt.gz · Last modified: 2023/07/12 14:11 (external edit)