Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:9025 [2022/07/20 14:33] – chrissy
+++ internal:proddocs:9025 [2025/11/18 13:22] (current) – updated image for 9025 program file zbigniew
@@ Line 1: / Line 1: @@
 ====== 9025/3185 Build Instructions ======
+<note warning>**The 9025/3185 PCB assembly contains components that are sensitive to electrostatic discharge (ESD)- Please make sure you are wearing your wrist strap when handling.**</note>
 <note important>**These two products are the same build, programming and testing Instructions. J1939 to NMEA2000 = 3185
@@ Line 41: / Line 42: @@
 {{:internal:proddocs:9025.8.png?600|}}
-<note warning>**Then select the Hex file you wish to load by clicking the browse button, Ensure you select the correct one e.g 3185 or 9025**
+<note warning>**Then select the Hex file you wish to load by clicking the browse button, Ensure you select the correct one e.g 3185 or 9025, see example below.**
 </note>
-{{:internal:proddocs:9025.9.png?600|}}
+{{:internal:proddocs:9025-prog_file.png?600|}}
 <note important>**USE ADVANCED MODE IF YOU CANNOT LOAD SOFTWARE
 Double check that you have selected the correct Hex file and it has been loaded successfully**
 </note>
+{{:internal:proddocs:9025.10.png?600|}}
+**Once you are satisfied the correct Hex file has been selected and loaded successfully you can then proceed to program the J1939 to NMEA2000 adaptor.
+Press the Program button**
+**Keep an eye on the console output window for feedback on how the programming procedure is running.
+**
+{{:internal:proddocs:9025.11.png?600|}}
+**At the end of the programming procedure you will be greeted with a Programming/Verify complete message.
+**
+{{:internal:proddocs:9025.12.png?600|}}
+**Test Procedure**
+**Select J1939 SIM from the test equipment**
+**Using test lead, fit 3 x wires
+White / black / blue**
+<note>**Connect the J1939 simulator
+Note –you will require 3 cables from the network to do the test, Once this is connected, the green LED will also flash rapidly, see pics below**</note>
+{{:internal:proddocs:9025.13.png?600|}}{{:internal:proddocs:9025.14.png?600|}}
+<note>** With a NMEA and J1939 connection, the green LED should flash every 1 second. This means the unit is working.
+Optional: For further testing you can: unplug the 3185 simulating device from the J1939 sim kit (keep both connections to the 9025 board).
+Open PCan-view, filter settings - Extended, OK. Then go to S:\Code\Published PC Programs\NMEASimulator and launch NMEASimulator.exe, INITIALIZE, ADD CourseAndSpeedOverGround.
+Now in Pcan-view you should see CAN data popping up. Two lines every 0.1s and two other lines every 1s (If this does not show up, close pcan-view and all other CAN bus programs, and launch again in this sequence.
+When you tick the random box in NMEA Simulator, the data for both sets of boxes should start changing. If it does not, make sure the instance switch is set to the correct instance. **</note>
@@ Line 64: / Line 101: @@
 {{:internal:proddocs:9025.2.png?600|}}