Table of Contents
5985 DMX to NMEA Adaptor
Introduction
The Oceanic Systems 5985 DMX to NMEA Adaptor is designed to connect DMX512 controlled lights to the NMEA2000® network to be displayed and controlled with a compatible Poseidon® system. The 5985 is capable of controlling 4 zones of lights, each with a channel format of RGBW.
Firmware Revision
The information in this manual corresponds to firmware revision 1.0.0
Features
The NMEA2000® 5985 Rudder Angle Adaptor has the following features:
- 4 in-built programs
- Control DMX512 data from a compatible Poseidon® System
- Indicator LEDs for each active input
- Switch settable Device Instance
- Operating Voltage: 9 to 32V
Installation
In the box
You should find the following items in the 5985 shipping box:
1 x 5985 DMX to NMEA Adaptor
1 x NMEA2000 drop cable
1 x 5985 User Manual (This document)
Mounting the Unit
The unit is designed to be cable tied either onto a suitable location or into the main cable harness.
Connecting the NMEA2000® Cable
The NMEA2000® interface cable should be connected to a nearby NMEA2000® Tee connector (part number 3802). The male end of the cable should be inserted into the female Tee connection noting the position of the keyway in the plug and the socket. Ensure that the locking ring is securely tightened so that the connection remains waterproof and sound.
Connecting the DMX512 Interface
Connect the A,B and GND of the DMX cabling in place of any other DMX controller. Refer to the below image for the connection scheme.
Maintenance
- Clean the unit with a soft cloth
- Do not use chemical cleaners as they may remove paint or markings or may corrode the enclosure or seals
- Ensure that the unit is mounted securely and cannot be moved relative to the mounting surface. If the unit is loose, tighten the mounting screws
- Check the security of the cables connected to the NMEA 2000 connector, tighten if necessary
- Check the security of the cables connected to the Spade connectors, ensuring a tight fit
Technical Specification
As Oceanic Systems are constantly improving their products specifications are subject to change without notice. Oceanic System’s products are designed to be accurate and reliable however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques.
| Parameter | Comment |
|---|---|
| NMEA2000 Version | 2.101 Level B |
| Maritime Navigation and Radio Communication Equipment | IEC60945 |
| CE and FCC | Electromagnetic Compatibility |
NMEA2000® Parameter Group Numbers (PGNs)
| Type | PGN No. | PGN Name |
|---|---|---|
| Protocol | PGN126464 | Tx/Rx PGN List |
| PGN126996 | Product Information | |
| PGN059392 | ISO Acknowledge | |
| PGN059904 | ISO Request | |
| PGN060928 | ISO Address Claim | |
| PGN126208 | Command/Request Group |
Electrical and Mechanical
| Parameter | Value | Comment |
|---|---|---|
| CAN Operating Voltage | 9 to 32 Volts | |
| Power Consumption | <50mA | Average Operating |
| Load Equivalence Number | 1 | LEN |
| Reverse Battery Protection | Yes | Indefinitely |
| Load Dump Protection | Yes | SAE J1113 |
| Size | 37 x 97 x 32 | mm |
| Weight | 175 | grm |
Environmental
| Parameter | Value |
|---|---|
| IEC 60954 Classification | Protected |
| Degree of Protection | IP67 |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -50°C to 70°C |
| Relative Humidity | 93%RH @40° per IEC60945-8.2 |
| Vibration | 2-13.2Hz @ ±1mm, 13.2-100Hz @ 7m/s2 per IEC 60945-8.7 |
| Electromagnetic Emission | Conducted and Radiated Emission per IEC 60945-9 |
| Electromagnetic Immunity | Conducted, Radiated, Supply, and ESD per IEC 60945-10 |
| Safety Precautions | Dangerous Voltage, Electromagnetic Radio Frequency per IEC 60945-12 |