This is an old revision of the document!

Warning: Undefined array key 1 in /data/docs.osukl.com/public_html/lib/plugins/note/syntax.php on line 103

9025 Build Instructions

Tools: 5mm long drive socket + driver T10 Torx security bit 17mm spanner

See NMEA 2000 to J1939 Flashing Guide for programming instructions. S/parts_Documents/3185/ programming instructions, Ensure the logic board is programmed with the latest firmware revision before placing into the housing as once installed you will not be able to programme the unit or flash the firmware.

Add 4 x 200943 spacers to existing studs in metalwork.

Place the board 10262 in to the housing. Remove the rubber grommet and nut from PL1, see pic below.