Oceanic Docs

User Tools

Site Tools

Trace:
product:5906

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
product:5906 [2022/11/18 07:39] – kacperproduct:5906 [2023/07/12 14:33] (current) – external edit 127.0.0.1
Line 3: Line 3:
 ===== Introduction ===== ===== Introduction =====
  
-The Oceanic Systems 5906 6 Channel Load Controller is designed to provide power to 6 individual channels, each with configuirable fuse currents and fuse tripping times. +The Oceanic Systems 5906 6 Channel Load Controller is designed to provide power to 6 individual channels, each with configuirable fuse currents and fuse tripping times.  
-The unit is suitable for powering loads like Lighting, x ,x. Each channel contains a status LED for displaying if the channel is On/Off/ or Tripped. +Each channel containing a status LED on the device for displaying if the channel is On/Off/ or Tripped, in addition to transmitting the channel status to be displayed on any Multi-function Display. 
-The power connections utilise +The unit is suitable for powering loads like Lighting, x ,x,.
 It is designed to work within the normal marine environment. It is very important that it is installed and set up correctly according to this manual. Please read and follow the installation and setup instructions carefully to achieve the best results. It is designed to work within the normal marine environment. It is very important that it is installed and set up correctly according to this manual. Please read and follow the installation and setup instructions carefully to achieve the best results.
  
 ==== Firmware Revision ==== ==== Firmware Revision ====
  
-The information in this manual corresponds to firmware revision 2.0.0+The information in this manual corresponds to firmware revision 1.0.0
  
 ===== Features ===== ===== Features =====
  
-The NMEA2000® 3165 Rudder Angle Adaptor has the following features:+The 5906 6 Channel Load Controller has the following features:
  
-  * Adapts 10 – 180 Ohm European standard Rudder Angle Senders +  * M6 Tube Terminal Battery Inputs (9 to 24V). 
-  * Adapts 240 – 30 Ohm American standard Rudder Angle Senders +  * Provides a maximum 24Volts at 10Amps per channel. 
-  * Has Port/Starboard indicator LEDs for easy setup +  * NMEA2000® Micro-C Interface Plug. 
-  * Indicator LEDs for each active input +  * Heartbeat LED Confirming NMEA Transmission. 
-  * Switch settable Rudder Instance +  * Indicator LEDs for each Channel State. 
-  * Operating Voltage: 9 to 32V +  * Robust Environmentally protected enclosure and connections. 
-  * No display unit setup required +  * The unit reports Switch Status and Channel Current. 
-  * Standard NMEA2000® Interface+  * Settable channel fuse current and fuse tripping time.
  
 ===== Installation ===== ===== Installation =====
Line 31: Line 31:
 You should find the following items in the 3165 shipping box: You should find the following items in the 3165 shipping box:
  
-1 x 3165 NMEA2000® Rudder Angle Adaptor+1 x 5906 6 Channel Load Controller
  
 1 x NMEA2000 drop cable 1 x NMEA2000 drop cable
  
-1 x 3165 User Manual (This document)+1 x 5099 Male Deutsch Adapter Kit 
 + 
 +1 x 5906 User Manual (This document)
  
 ==== Mounting the Unit ==== ==== Mounting the Unit ====
  
-The unit is designed to be cable tied either onto a suitable location or into the main cable harness.+The unit is designed to be screwed onto a suitable location.
  
 ==== Connecting the NMEA2000® Cable ==== ==== Connecting the NMEA2000® Cable ====
Line 47: Line 49:
 Ensure that the locking ring is securely tightened so that the connection remains waterproof and sound. Ensure that the locking ring is securely tightened so that the connection remains waterproof and sound.
  
-==== Connecting the Rudder Angle Sensor Cable ====+==== Connecting Battery Supply Cables ====
  
-Resistive rudder angle senders have two terminals, the sensor terminal may be marked with an “S” or a “G” and the other marked with a ground or “-“ mark. If they are not marked the ground or “-“ may be the terminal which is connected to the metal housing and the sensor terminal will be insulated from the metal housing. +Channel Load Controllers have two power terminals , The positive terminal is marked with a "+" (Red Colour) and the ground terminal is marked with a "-" (Black Colour). Ensure that the gauge of wire used is adequate for the power it will be carrying to the load.
-Ensure that there are NO other cables connected to the rudder angle sender and then connect +
-the 2 metre 2 core gray cable to those terminals according to the following table.+
  
-^Sender Terminal^Wire Colour| +**Warning - Unit must be installed by a qualified electrical engineer. Incorrect Connections or Cables Used may result in damage to the unit or load, PERSONAL INJURY or DEATH** 
-|Sensor (S or G)|Red|+ 
 + 
 +^Power Terminal^Wire Colour| 
 +|Positive (+)|Red|
 |Ground (-)|Black| |Ground (-)|Black|
 +
 +==== Connecting Channel Supplies to Deutsch Connector ====
 +The 6 Channel supply outputs are taken from the Load Controller using a DT15-12PA Deutsch Connector. Each wire should be of adequate gauge to carry the load rated current 
 +
 +**Warning - Unit must be installed by a qualified electrical engineer. Incorrect Connections or Cables Used may result in damage to the unit or load, PERSONAL INJURY or DEATH**
  
 ===== Configuration ===== ===== Configuration =====
product/5906.1668757195.txt.gz · Last modified: 2023/07/12 14:11 (external edit)
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki