Differences

This shows you the differences between two versions of the page.

--- product:5906 [2022/11/18 09:13] – kacper
+++ product:5906 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 31: / Line 31: @@
 You should find the following items in the 3165 shipping box:
-x 3165 NMEA2000® Rudder Angle Adaptor
+x 5906 6 Channel Load Controller
 x NMEA2000 drop cable
-x 3165 User Manual (This document)
+x 5099 Male Deutsch Adapter Kit
+x 5906 User Manual (This document)
 ==== Mounting the Unit ====
-The unit is designed to be cable tied either onto a suitable location or into the main cable harness.
+The unit is designed to be screwed onto a suitable location.
 ==== Connecting the NMEA2000® Cable ====
@@ Line 47: / Line 49: @@
 Ensure that the locking ring is securely tightened so that the connection remains waterproof and sound.
-==== Connecting the Rudder Angle Sensor Cable ====
+==== Connecting Battery Supply Cables ====
-Resistive rudder angle senders have two terminals, the sensor terminal may be marked with an “S” or a “G” and the other marked with a ground or “-“ mark. If they are not marked the ground or “-“ may be the terminal which is connected to the metal housing and the sensor terminal will be insulated from the metal housing.
+Channel Load Controllers have two power terminals , The positive terminal is marked with a "+" (Red Colour) and the ground terminal is marked with a "-" (Black Colour). Ensure that the gauge of wire used is adequate for the power it will be carrying to the load.
-Ensure that there are NO other cables connected to the rudder angle sender and then connect
-the 2 metre 2 core gray cable to those terminals according to the following table.
-^Sender Terminal^Wire Colour|
+**Warning - Unit must be installed by a qualified electrical engineer. Incorrect Connections or Cables Used may result in damage to the unit or load, PERSONAL INJURY or DEATH**
-|Sensor (S or G)|Red|
+^Power Terminal^Wire Colour|
+|Positive (+)|Red|
 |Ground (-)|Black|
+==== Connecting Channel Supplies to Deutsch Connector ====
+The 6 Channel supply outputs are taken from the Load Controller using a DT15-12PA Deutsch Connector. Each wire should be of adequate gauge to carry the load rated current
+**Warning - Unit must be installed by a qualified electrical engineer. Incorrect Connections or Cables Used may result in damage to the unit or load, PERSONAL INJURY or DEATH**
 ===== Configuration =====