Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:3345 [2021/12/22 11:01] – chrissy
+++ internal:proddocs:3345 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 8: / Line 8: @@
 unit label and serial number label.**
-{{:internal:proddocs:capture.png|}}
+{{:internal:proddocs:capture_1.png|}}
 **10500 cable modify to make a 10502.
 Note – check stock as this may have already been done.
 Original cable.**
+{{:internal:proddocs:capture_2.png|}}
+**New cable.**
+**Remove green center piece.
+Remove blue and white cables.
+Remove white pins and fit the blue and white cables in place as per picture.
+The pins should click into place when seated correctly.
+Replace green center piece.**
+<note important>**DO NOT remove the red or black pins.**</note>
+First, check to see which version of software is going on to the unit – standard or Viking.
+  - Plug into Monex, and wait for the Manufacturing screen to appear.
+  - Then, insert USB into the back of the unit.
+  - Wait for the unit to update.
+  - Remove USB, see pics below.
+  - This should now come up with the Oceanic logo, then into the main screen.
+  - Add the appropriate serial number by filling in the box on Monex then pressing the “set serial” button.
+{{:internal:proddocs:img_20220413_134540_1_.jpg?600|}}{{:internal:proddocs:img_20220413_134452_1_.jpg?600|}}
+**Remove this label from the side of the unit see pic below. Bold Text**
+{{:internal:proddocs:3345..2.png|}}
+**Set serial number on Monex and Fit this label to the top of the unit.**
+{{:internal:proddocs:3345..3.png|}}
+**Fit dome sticker.**
+{{:internal:proddocs:3345..4.png|}}
+**Pack with instructions, cable and fixing kit.**
+{{:internal:proddocs:3345.5.png|}}
+**Then, into final packaging with QC sticker etc.**
+ --- //[[chrissy@osukl.com|Christine Walsh]] 21/02/2022 09:12//updated