Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:3350 [2023/07/12 14:33] – external edit 127.0.0.1
+++ internal:proddocs:3350 [2025/05/16 09:34] (current) – [Packaging] david
@@ Line 17: / Line 17: @@
 {{:internal:proddocs:33501-1.png|}}
-<note important> All new revison boards use Atmel</note>
+<note important> All new revision boards use Atmel</note>
   -   Open Atmel Studio.
@@ Line 41: / Line 41: @@
 <note important> note correct orientation. One side has 5 pins the other has 6. (The header pins may need to be trimmed down by approx 3 mm to allow better fitment of the outer casing.)
 </note>
-The unit is now connected to the Monex system to check the LED Function @100% and 88% this ensures that all LED bars required to illuminate are lit, and check the Alarm Light function.
+The unit is now connected to the Monex system to check the LED Function @100% and 88% this ensures that all LED bars required to illuminate are lit, and check the Alarm Light function. Check the lights dim when the sensor is covered. Check the alarm works at below 20% for Fuel and Fresh water, and at above 80% for Grey and Black water.
 {{:internal:proddocs:3350-2.png|}}
@@ Line 121: / Line 121: @@
   *   - Select bradyBBP11-34L(copy 1) and select Calibrate.
   *   - label will calibrate.
+===== Inspection =====
+  *   Check serial number label is correct.
+  *   Ensure all parts are present.
+  *   Check for visual damage.
+  *   Ensure the unit works on Monex and test the alarm.
 ===== Packaging =====
@@ Line 134: / Line 140: @@
 {{:internal:proddocs:3350-11.jpg?200|}}
- --- //[[chrissy@osukl.com|Christine Walsh]] 29/09/2021 16:08// updated
+ --- //[[david@osukl.com|David Whittle]] 16/05/2025 10:34// updated