Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:3420 [2023/07/12 14:33] – external edit 127.0.0.1
+++ internal:proddocs:3420 [2023/07/26 10:01] (current) – eral
@@ Line 70: / Line 70: @@
 ===== Testing Instructions =====
+<adm warning>DUE TO ELECTRIC SHOCK HAZARD, TESTING WILL BE DONE BY ENGINEERING TEAM.</adm>
 <note warning> The 3420  Testing process involves HIGH VOLTAGE, Make sure to disconnect power when handling connections, and stay away from PCB, Variac and Test Box when power is turned on! </note>
@@ Line 179: / Line 181: @@
 The Phase A, B ,C Line-Neutral Voltages should be approximately 31V
-The Phase A, B, C Current should be approximately 1.2A
+The Phase A, B, C Current should be approximately 1.4A
-The Phase A, B, C Real Power should be approximately 37W
+The Phase A, B, C Real Power should be approximately 44W
 === Step 15 ===
@@ Line 190: / Line 192: @@
 **Keep away from the PCB, AC Test Box and PCB when power on.**
-The Phase A, B, C Line-Neutral Voltages should be approximately 129V
+The Phase A, B, C Line-Neutral Voltages should be approximately 130V
-The Phase A, B, C Current should be approximately 5.3A
+The Phase A, B, C Current should be approximately 5.9A
-The Phase A, B, C Real Power should be approxmiately 635W
+The Phase A, B, C Real Power should be approxmiately 767W
 === Step 16 ===
@@ Line 205: / Line 207: @@
 The Phase A, B, C Line-Neutral Voltages should be approximately 251V
-The Phase A, B, C Current should be approximately 10.4A
+The Phase A, B, C Current should be approximately 11.4A
-The Phase A, B, C Real Power should be approximately
+The Phase A, B, C Real Power should be approximately 2880
 === Step 17 ===
 Change the Set Parameter to: Device Instance