Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:3890 [2021/09/23 13:18] – chrissy
+++ internal:proddocs:3890 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 9: / Line 9: @@
   * 	Test that the Unit is functioning correctly. Using the Multi meter.
   *     Apply 24 volts to the Input Terminal and measure the voltage at the output terminal which should be 13.6 volts.
+<note important>
-{{:internal:proddocs:3890-6.png?600|}}{{:internal:proddocs:3890-3.png?600|}}
+See Pic for Imput and Output terminals</note>
+{{:internal:proddocs:3890-1.jpg?600|}}{{:internal:proddocs:3890-2.jpg?600|}}
 If the Power Adaptor is working correctly, the manufacturers label can now be carefully removed and replaced by the Oceanic Systems label with Part Number and Serial Number positioned as shown. If necessary use the Ambersil to assist in the removal of any adhesive remaining after removing the label.
@@ Line 40: / Line 41: @@
+Take Lead assembly 3832 twist together the bared ends of the Grey and Black leads and insert into one of the female terminals supplied with the unit crimp securely. Repeat this operation with the Red and Brown leads.
+Attach Label to Green Lead as shown
+Attach Cable Assembly Label  approx 15-20mm away from cable heatshrink as shown.
+Connect cable terminals to the output terminals on the Power Adaptor as shown ensuring that the RED and Brown leads are on the +13.6v terminal. + or – 0.5.
+|}}{{:internal:proddocs:3890-2.png?600|}}{{:internal:proddocs:3890-1.png?600|}}
-  * Take Lead assembly 3832 twist together the bared ends of the Grey and Black leads and insert into one of the female terminals supplied with the unit crimp securely. Repeat this operation with the Red and Brown leads.
-  * Attach Label to Green Lead as shown
-  * Attach Cable Assembly Label  approx 15-20mm away from cable heatshrink as shown.
-  * Connect cable terminals to the output terminals on the Power Adaptor as shown ensuring that the RED and Brown leads are on the +13.6v terminal. + or – 0.5.
-{{:internal:proddocs:capture.png?600|}}{{:internal:proddocs:3890-2.png?600|}}{{:internal:proddocs:3890-1.png?600|}}
 ====== Packaging ======
@@ Line 59: / Line 58: @@
 {{:internal:proddocs:3890-4.png?600|}}   {{:internal:proddocs:3890-5.png?600|}}
+ --- //[[chrissy@osukl.com|Christine Walsh]] 06/10/2021 15:33// updated