Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:5021 [2021/09/29 11:49] – chrissy
+++ internal:proddocs:5021 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== 5021 Build instructions ======
+<note warning>
 <note warning>The 5021  PCB assembly contains components that are sensitive to electrostatic discharge (ESD) – please make sure you are wearing your wrist strap when handling.</note>
-Using a File, modify the corners of the lower rear cover (203084).
+Using a File, modify the corners of the lower rear cover (203689).
 Identify with white marker see picture below. Ensure all debris has been removed.
+The 10866 cable assembly needs to be modified remove small connector only  from assembly add 203794 connector and 203793 crimp. (Ref 10871 drawing)
 {{:internal:proddocs:5021-1.png?600|}}
@@ Line 16: / Line 19: @@
 Fit PCB 10293-A into position adjacent AD board video board
 Fit Video Board in position using Screws (202429)
 {{:internal:proddocs:5021-3.png?600|}}{{:internal:proddocs:5021-4.png?600|}}
@@ Line 49: / Line 51: @@
   * BOOTLEVEL = 2V7
   * SPIEN = Checked
-  *
   * BOOTSZ = 2048W_7800
   * BOOTRST = Checked
@@ Line 60: / Line 61: @@
   * Then power cycle the unit.
+{{:internal:proddocs:5021-11.png?600|}}
+====== Test Procedure ======
+  * Connect USB and VGA cables to board.
+  * Power up supply.
+  * Check all functions on display are in working order.
+  * Disconnect leads
+{{:internal:proddocs:5021-12.png?600|}}{{:internal:proddocs:5021-13.png?600|}}
+{{:internal:proddocs:5021-14.png?600|}}
+**Silicone screen and leave to cure overnight. once cured check for any holes**
+{{:internal:proddocs:5015......png?600|}}{{:internal:proddocs:5015.10.jpg?600|}}
+**Manual Printing**
+  * Go to (S) Drive.
+  * Parts Documents.
+  * Select 5021
+  * Select PDF's.
+  * Select 5021_user manual and print.
+**Label printing**
+  * Choose labels required
+  * Select (LabelDirect)
+  * Close (Pop Up)
+  * Go to file-open
+  * Select - Parts documents
+  * Select - 5021
+  * Select - Labels
+  * Select – 5021 info
+  * Highlight Serial number and change in Text box.
+  * Go to Incrementing number Properties and change serial number.
+  * Go to file -Print Setup
+  * Select bradyBBP11-34L(copy 1) and select Calibrate.
+  * label will calibrate.
+====== Packaging ======
+Ensure Blue film is positioned on screen.
+{{:internal:proddocs:502115.png?600|}}
+Inserts to be positioned on each end of screen.
+{{:internal:proddocs:5021-16.png?600|}}
+{{:internal:proddocs:5021-17.png?600|}}
+ --- //[[chrissy@osukl.com|Christine Walsh]] 29/09/2021 15:03//