Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:5985 [2022/10/06 08:50] – kacper
+++ internal:proddocs:5985 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 55: / Line 55: @@
   * Monitor the Device instance reported by Monex and make sure it matches the Rotary switch instance.
-{{:internal:proddocs:3165_device_instance.png?600|}}
+{{:internal:proddocs:5985_device_instance_test.png?600|}}
-=== Rudder Angle Testing - (180 - 0 Ohms)  ===
-  * Connect a resistance box to the space connectors using Crocodile Clips.
-{{:internal:proddocs:3165_res_box.jpg?600|}}
-  * Calibrate the sender first by setting the resistance to 180 Ohms, then setting the instance switch to '5' and putting a magnet to the reed switch.
-{{:internal:proddocs:3165_stbd_cal.jpg?600|}}
-  * Calibrate the sender again by setting the resistance box to 10 Ohms, then setting the instance switch to '4' and putting a magnet to the reed switch.
-{{:internal:proddocs:3165_port_cal.jpg?600|}}
-  * Go to the 'Rudder' tab on Monex, you should be able to see this (instance matching that on yor device):
-{{:internal:proddocs:3165_rudder_tab.png?600|}}
-  * **Set the resistance box to 10 Ohms** - The Rudder angle should be -45 degrees.
-  * **Set the resistance box to 95 Ohms** - The Rudder angle should be 0 degrees.
-  * **Set the resistance box to 180 Ohms** - The Rudder angle should be 45 degrees.
-=== Deflection Angle Testing ===
-  * Change the Deflection angle to 60 degrees by setting the rotary switch to '9' and pressing a magnet up to the reed switch
-{{:internal:proddocs:3165_rudder_angle_60.jpg?600|}}
-  * **Set the resistance box to 10 Ohms** - The Rudder angle should be -60 degrees.
-  * **Set the resistance box to 95 Ohms** - The Rudder angle should be 0 degrees.
-  * **Set the resistance box to 180 Ohms** - The Rudder angle should be 60 degrees.
-  * Return the deflection angle to the default 45 degrees by setting the rotary switch to '8' and pressing a magnet up to the reed switch
-{{:internal:proddocs:3165_rudder_angle_45.jpg?600|}}
   * Set the Rotary switch back to '0'.