Differences

This shows you the differences between two versions of the page.

--- internal:proddocs:4521 [2022/03/08 08:36] – chrissy
+++ internal:proddocs:4521 [2023/07/12 14:33] (current) – external edit 127.0.0.1
@@ Line 35: / Line 35: @@
 {{:internal:proddocs:4521.9.png?600|}}
+**After assembling the four nuts the Base Cover 201030 is ready to be assembled**
+{{:internal:proddocs:4521.14.png?600|}}
+**The Base Cover 201030 is assembled using 4 off 201074 Torx mono drive screws tightened to a torque of 1.0Nm see below**
+{{:internal:proddocs:4521.15.png?600|}}
+**When fitting the nut for the M12 connector use shim washer 203017**
+{{:internal:proddocs:4521.16.png?600|}}
+**Affix self adhesive 200337 label to one end of cover, positioned centrally as shown.
+Label printed with Part Number
+Software revision, Serial Number,
+Channel Temperature Module, see below**
+{{:internal:proddocs:4521.10.jpg?600|}}
+**The serial number on the product
+    label, can now be assigned to the
+    product.
+   Connect the unit via the CAN lead from
+   the PC. In the Monex program
+   select SET SERIAL No you can now type
+   in the serial number.
+   You can now check that the unit has
+   Retained the information by selecting
+   GET PRODUCT INFO this should now
+   Display the PRODUCT NUMBER, SERIAL
+   NUMBER, HARDWARE and SOFTWARE
+   Version numbers.
+Basic temperature reading test can be carried out on Monex – note, red lights should be lit when test leads are not connected.
+**
+====== Packaging ======
+**
+Check manual for package contents**
+{{:internal:proddocs:4521.11.jpg?600|}}{{:internal:proddocs:4521.12.jpg?600|}}
+{{:internal:proddocs:4521.13.jpg?600|}}
+ --- //[[chrissy@osukl.com|Christine Walsh]] 08/03/2022 09:26//created