internal:proddocs:5971
This is an old revision of the document!
5971 Build Instructions
Programming Procedure
You will need an ST-Programmer and the appropriate connector for the board see pic
Connect the ST-Programmer to SK6 on the PCB see pic below. Connect to NMEA Network
Open STM32CubeProgrammer on your PC, you should see this: see pic below.
Click “Connect” in the top right corner with the following settings
Click the ‘Erasing and Programming’ View.
In the file path, click “Browse” and select the following file: S:\Code\Production\5971 Nav Light Module\5971-v1.0.5.bin
internal/proddocs/5971.1646049579.txt.gz · Last modified: 2023/07/12 14:11 (external edit)